Telular Wi PATHTM SX7T Terminal and SX7M Modem EVDO - Manual (Page 11)

Activating Your Wireless Services on the SX7
Before you can set up a data connection, you will need to enter your account activation
information in the Telular Device Manager.
1. Connect to the Telular Device Manager. (See “Using the Telular Device Manager”
on page 6.)
2. From the Home screen (or from any other screen), click Activation (1).
3. Wait 5–10 minutes to see if your unit will auto-register itself on the wireless network.
If the Activation Status field displays ACTIVE (2), your SX7 is ready for use. Proceed to
“Setting Up Your Wireless WAN Data Connections” on page 9.
4. If your SX7 is not active, click Carrier Provisioning – IOTA (3) to initiate “over-the-air”
provisioning by your wireless service provider. Monitor your progress by checking the
Activation Status display (2).
5. If your service provider does not offer IOTA provisioning, manually enter your
MSL/SPC Code (4a), your MDN (10-digit wireless phone number) (4b), and your
MIN/MSID (usually also your 10-digit wireless phone number) (4c). Contact your
wireless service provider for your account settings.
6. Click Save (5). If you have no additional changes, click Restart (6) to complete
Activation. The SX7 will power down and restart.
1
5 6
4
3
2
4a
4b
4c
Note
If you purchased your SX7 through your wireless service provider, it may already be provisioned
with your account information. If it has been provisioned, please skip ahead to
“Setting Up Your
Wireless WAN Data Connection” on page 9.
Data Connection: The Basics
Wi PATH TM SX7 9 User Guide