Telular Wi PATHTM SX7T Terminal and SX7M Modem EVDO - Manual (Page 21)

For RJ-11 Jack Mode (4) select the appropriate combination of J1 Voice, J2 Voice or
J2 FAX, J2 Data.
Click Save (5), and then click Restart (6) to save your settings and restart the SX7T.
2. Plug an RJ-11 cable into the Phone/Fax input on the back panel.
3. Connect the other end of the RJ-11 cable into your fax machine’s RJ-11 input jack.
4. If the fax machine has a handset, lift it off the receiver and listen for a dial tone.
(Depending on your fax machine, you may also press TALK, ON, Hook, or Speaker.)
5. If you hear a dial tone, send a test fax to confirm your service is active.
Note
The SX7T is only compatible with Group 3 (G3) fax machines transmitting at 2,400 to
14,400 bps/baud.
Please confirm your SX7T and fax machine settings before calling your service provider or
Telular Tech Support.
Phone/Fax
Voice and Fax Options (SX7T Only)
Wi PATH TM SX7 19 User Guide