Telular Wi PATHTM SX7T Terminal and SX7M Modem EVDO - Manual (Page 12)

Setting Up Your Wireless WAN Data Connection
Once the computer and the SX7 are connected and powered up, you will need to set up your
Wireless WAN data connection. The Wireless WAN connection is the primary data service
connection for your SX7.
1. Connect to the Telular Device Manager. (See “Using the Telular Device Manager” on
page 6.)
2. From the Home screen, click Setup (1) > Wireless WAN (2).
3. If required by your wireless service provider, enter your Username (3a) and
Password (3b).
4. For PSD Auto Connect, click Always On (3).
5. Click Save (5) and then click Restart (6) to save your settings and restart the SX7.
Note
If you are connecting through a USB Dial-Up Networking (DUN) connection (see “Using the
USB Connection Option” on page 12), your dial-up connection will be terminated and the
dial-up window will appear when you restart the SX7. Re-enter your information (if it is not
automatically populated) and click
Connect .
Tip
If you have additional settings to enter, you can continue entering settings and clicking Save .
When you have finished making all your changes, click Restart .
1 1
2
4
5 6
3a
3b
Tip
If you do not have an unlimited data plan with your wireless service provider, you may want to
select
On Demand instead of Always On . On Demand connects to the network automatically
anytime you are using data services, but disconnects whenever no data is being transferred.
Data Connection: The Basics
Wi PATH TM SX7 10 User Guide