TOA Electronics EXES 6000 CP-63 - Manual (Page 8)

Functions: EXES-6000 CP-63
Notes.
1. XX/YY indicates to select either XX (Function) or
YY (Function).
2. Not all circles (O) in The Switch Selection table cor-
respond to the DIP switches of the CP unit.
*1: "PV" (system with Privacy function) Type: with the
Privacy switch in the ON position, a brief Privacy
Tone sounds.
"NP" (system without Privacy function) Type: A
station may be called by the continuous calling tone
when the Privacy switch is placed in the ON position.
*2: When a hands-free station without handset is called
by the continuous calling tone, conversation may
start by touching any key
*3: Additional equipment is required for paging.
*4: Each zone of paging provides Station paging and/or
PA paging. (Within 7 zones per exchange)
*5: It is necessary to respond only by touching
(without zone No.)
*6: It is possible to make a paging and its response across
the other exchange. However, a response to the zone
paging is possible only from a station connected to
the exchange having the paged zone.
*7: Station numbers of each exchange can be changed
freely within the range of "Selectable numbering
schedule of each exchange".
*8: Calling tone: 0.3 sec (Trill note tone)/0.2 sec (Single
note tone)/none.
Paging pre-announcement tone: 2 sec/1 sec/none.
*9: Selects whether or not the indication of the calling
party station continuously lights up, after the calling
party has cancelled the call to a line which is busy or
in the privacy mode.
*10: A call can only be made from the stations No. 200 ~
327 connected to the "A" type exchange. It is pos-
sible to respond from any station.
— 7 —