TOA Electronics EXES 6000 CP-63 - Manual (Page 29)

3. One-shot make output may be operated even in
the event every link is not free. But it may not
be operated in single digit dialing if all links are
busy.
4. Single digit registration is not available from any
substation programmed by No.200 programming,
even if its line is connected with master station.
Single Digit Dialing
Single digits of station number
Single digit of personal number
Single digit of paging call
Single digit of All-call paging response
Single digit registration
Register in advance as follows:
Confirmation tone
Station number
Confirmation tone
Personal number
Confirmation tone
Paging zone
Confirmation tone
Confirmation tone
Any four digits
Confirmation tone
Confirmation tone
Any three digits
Any two digits
Single digit dialing
When required, dial
and the registered number will be called automatically.
Note:1. Single digit registration can be cancelled by registering
your assigned station number.
2. Any function dialing with long operation may be
shortened by Single Digit Dialing.
Example: Single digit Combination paging Dial
is called automatically. and
Combination paging
— 28 —