TOA Electronics EXES 6000 CP-63 - Manual (Page 33)

Note.
When 2 or 3 exchanges are connected by tie-line, select
the Remote response group within the stations connect-
ed to the same exchange.
Remote Response
This feature is available only among stations programmed
for this purpose. When a station at which no one is present
is called by means of a continuous calling tone, remote
response to that call can be made by pressing the( PTT key
from any other station programmed for this function.
Note.
1. This function is only possible when a station is called
by a continuous calling tone.
2. When this function is used from a station with the
Privacy switch ON, press the (PTT) key, after lifting
a station handset or after shifting the Privacy switch
to OFF.
Programming the remote response group
Establish the remote response group of stations and
designate a specific station within the group as a tem-
porary "Master station" and the rest as "Substations".
Note.
Make sure that the temporarily disignated master
always registers his own station number at time of
programming.
Each of "Substation" within the group registers the
"Master" 's number by dialing
I he Master station registers the number of his own
station as follows.
Conversation after Remote response
Dial operation for Remote response
Programming the remote response group (Example)
Cancelling remote response program
Touch dialing at each "Substation"
His own Substation number
cancel Is the Remote response program.
Remote response group
— 32 —