Tektronix P H A S E R Phaser 840 - Manual (Page 29)

27
Hints for Moving the Printer
All moves
Follow these guidelines when moving the printer within the office and preparing it
for shipment:
1 The printer must be cool before moving it; otherwise, ink spills may damage the printer.
Use this method:
■ Turn off the printer. Before the front panel goes blank ( you have only 4 seconds ),
select Shut Down For Moving Printer .
■ The printer takes about 15 minutes to cool; during that time, the front panel reports its
progress. When the cool-down is complete, the front panel goes blank. It is now safe
to move the printer.
2 Removing the upper media tray provides a place for your hands when lifting the printer.
3 Always move the printer separately from its High-Capacity Paper Tray Assembly.
9102-46
36 kg
79 lb.
Preparing the printer for shipment
■ Always repack the printer properly to ensure its safe
shipment; refer to the online instructions, “Repacking
the Printer,” on the printer’s CD-ROM or web site.
■ Always remove the maintenance drawer (A) before
shipment to avoid damage to the printer. Place the
drawer in a plastic bag for storage.
Parts of the printer may be hot; to avoid
personal injury, allow the printer to cool and
use caution when handling it.
9102-48
Moving the Printer