TechniSat MultyFocus - Manual (Page 4)

2 Please read first!
Reading the operation instructions
Chapters 4 and 5 explain how to connect and adapt the receiver to the outdoor unit (reflector, LNB,
etc.), the TV set, etc. This set-up is required only once; you only need to make amendments in case the
outdoor unit installation has changed or additional equipment has Been connected, e.g. decoder.
Chapter 6 describes all functions necessary for every-day use, such as channel selection or volume
control.
Chapter 7 will give you information on how you set up new channels and satellites or how you change the channel
sort order.
Chapter 8 lists all the pre-programmed channels.
Important notes on device control
Using a so-called „On Screen Display“ simplifies receiver control and reduces the number of keys on the remote
control. All features are displayed on the TV monitor and can be controlled by little key action.
Related features have been collected to a „MENU“.
A „POINTER“ marks the function you can activate at a time.
Example:
The last menu line always displays the „function keys“.
Use these to:
- move the pointer,
- start a function,
- change values,
- store changes, and
- to quit the menus.
Press the MENU key to change the background of some menus from coloured display to normal TV screen.
4
Main menu
> set timer
set time
childproof control feature
channel menu
^/v/OK/STOP
Pointer
Functions
Function keys
MENU
*M-Focus 2.6.95 14.12.1999 10:33 Uhr Seite 4