TechniSat MultyFocus - Manual (Page 18)

6 Operation
6.1 Switching on and off
Preferably use the power-on switch to turn the receiver on and off. This saves power and the environment.
For brief operational breaks use the remote control function:
> Press to turn on and to switch to standby mode.
6.2 Selecting a channel
a) Using the ten-key keypad
Channel position 123
Channel position 3
(wait 2 sec) Channel position 1
b) Press on the remote control
or on the receiver
c) Using channel lists
> press twice for TV channels, or three times for radio channels
> press to set pointer to desired channel.
> press or
> press to return to the channel previously selected.
The receiver only displays the channels of all stored satellites.
Deleted channels (see 7.3) Are not displayed.
6.3 Selecting a satellite
a) By selecting a related channel, e.g.:
> Reflector peaks ASTRA and selects channel position 3.
b) Using the satellite list
> press once.
> press to set pointer to the desired satellite.
> press or
> press to return to the channel selected previously.
The receiver only displays the channels of all stored satellites.
6.4 Volume control
> press to turn down, or to turn up
> press to turn off completely.
OK
OK
Netz
18
INDEX
INDEX
STOP
STOP
1 2 3
0 0 3
0 0 3
1
PROGR
*M-Focus 2.6.95 14.12.1999 10:36 Uhr Seite 18