TechniSat MultyFocus User Manual
Page 27
> press
to
set
pointer to „polarity“.
> press
to
select
„Normal“.
>
press
to store the
parameters selected
in this menu and to
tur n to the menu
„Audioeinstellungen“
(audio settings).
Press to select the next menu without
memorising the settings.
> press
to
set
pointer to „audio
bandwidth“.
> press
to
select „130 kHz“.
> press
to
set
pointer to
„Deemphase“
> press
to select „TMSP“.
> press
to set pointer to „basic volume“.
> press
to select 6.
> press
to set pointer to „mode“
> press
to select „Stereo“.
> press
to set pointer to „Freq. left“.
> press
to select „7.02 MHz“.
As the „Voreinstellungen“ (pre-adjustments) function has been turned On, the audio frequency of the right channel
automatically changes to 7.20 MHz. Turn off the „Voreinstellung“ (pre-adjustment) setting to select separate
frequencies and smaller increments on both audio channels.
> press
to store the parameters selected in this menu and to return to the menu „Neue Programme und
Satelliten“.
Press to select the next menu without memorising the settings.
> press
to set pointer to „Programm“ (channel).
> press .
> press
to select a new name and press
to store.
> press
to store and to return to the channel menu.
> press to revert to normal operation.
The new name appears once you have changed channels.
OK
OK
OK
OK
27
Video settings
brightness
3
> polarity
Normal
decoder
Int
decoder signal
D4
^/v//MENU/OK/STOP
INDEX
STOP
STOP
STOP
Audio settings
> audio bandwidth
130 kHz
deemphasis
TMSP
basic volume
6
pre-adjustments An
mode
Stereo
freq. left 7.02
MHz
freq. right
7.20 MHz
^/v//0-9/MENU/OK/STOP
*M-Focus 2.6.95 14.12.1999 10:37 Uhr Seite 27