Tascam BD-R2000 - Manual (Page 76)

76
Settings Menu
1-
4'6740
2.#;$#%-5'66+0)
$&&8&8+&'12$5'66+0)
4'57/'
10
56+../1&' #761
5'#/.'552.#;$#%-
':+6 5'.'%6
10
5'672
Playback Setting
o
BD-/DVD-VIDEO PB SETTING
BD-Video and DVD-Video playback settings can be specified
using the “BD-VIDEO RATINGS”, “COUNTRY CODE”,
“AUDIO LANGUAGE”, “SUBTITLE LANGUAGE”, and “MENU
LANGUAGE” items.
• BD-VIDEO RATINGS
For setting the lower age limit for BD-Video ratings.
Setting Values Description
NO LIMIT All BD-Videos can be viewed.
254YEAR(S)-
0YEAR(S)
BD-Videos that are subject to the age
limit cannot be viewed.
Memo:
• In order to set the restrictions, password (four-digit
number) registration is required.
• The password status becomes unregistered if the
restriction setting is disabled. A new password can be
registered after setting the age limit again.
• It is recommended that you note down the password in
case it is lost or forgotten.
• COUNTRY CODE
For setting the country code.
For details on the country codes, refer to the "Country Code
List" (A page 96) .
Memo:
• If the “BD-VIDEO RATINGS” setting is specified, you will
be required to enter the password registered for the “BD-
VIDEO RATINGS” in order to change the “COUNTRY
CODE”.
• AUDIO LANGUAGE
For setting the audio sound when playing back BD-Videos
or DVD-Videos.
For details on the language codes, refer to the "Language
Code List" (A page 94) .
• SUBTITLE LANGUAGE
For setting the subtitle language when playing back BD-
Videos or DVD-Videos.
For details on the language codes, refer to the "Language
Code List" (A page 94) .
• MENU LANGUAGE
For setting the menu language when playing back BD-
Videos or DVD-Videos.
For details on the language codes, refer to the "Language
Code List" (A page 94) .
• DIMMER (POWER OFF)
For turning on/off the light of the display window when the
power is turned "Off".
Setting Values Description
OFF Turns off the light.
ON Turns on the light.
o
QUICK STARTUP
The quick startup setting can be specified as follows.
Setting
Values
Description
OFF Starts up in the normal way.
ON Operation is speedily enabled after turning
on the power. (Quick start)
Memo:
• Setting to “ON” increases power consumption while the unit
is in the standby mode.
o
BUZZER OUTPUT
The buzzer setting can be specified as follows.
• REMOTE CONTROL SENSOR TONE
For setting whether to sound the buzzer when the remote
control sensor receives signals.
Setting
Values
Description
OFF Buzzer does not sound when the remote
control sensor receives signals.
ON Sounds the buzzer when the remote control
sensor receives signals.
• ALERT/WARNING TONE
For setting whether to sound the buzzer when an operation is
completed or when a warning message appears.
Setting Values Description
OFF Buzzer does not sound.
ON Sounds the buzzer.
o
DEFAULT SETTING
Restores the setting values on the setting screen to their
factory default values.
Setting Values Description
YES Restores the factory default values.
NO Returns to the initial screen without
resetting the values.
Memo:
• “BD-VIDEO RATINGS” and “COUNTRY CODE” settings
cannot be reset once they have been specified.