Toshiba RD-XV48DTKF - Manual (Page 93)

93 EN
Playback
1
Press [
B ON\STANDBY] to turn on
the unit.
To play back a tape, turn on the TV and be sure to
select the input to which the unit is connected.
2
Press [VCR].
3
Insert a pre-recorded tape, then
press [PLAY B] to begin playback.
4
During playback, press [PAUSE F].
Playback will be paused and sound will be muted.
5
Press [PLAY B] to resume playback.
6
Press [STOP C] to stop playback.
7
Press [OPEN
\CLOSE A] to eject the
tape.
Note
• When a tape without record tab is inserted, the unit
will start playback automatically.
• Tracking will be automatically adjusted upon
playback. To adjust the tracking manually,
press [PROG.
G \ H].
Recording and One-touch Timer
Recording (OTR)
Basic Recording
Before recording, make sure:
• The desired channel is selected by pressing
[the Number buttons] or [PROG. G \ H] on the
remote control.
• There is a tape with a record tab in the unit.
1
Turn on the unit and insert a
recordable videotape.
Make sure that the TV input is set on the unit.
2
Press [VCR].
3
Select the recording mode using
[REC MODE].
• The desired recording mode is selected in SP
(standard play) or LP (long play) mode by
pressing [REC MODE].
4
Select the desired channel to record
using [PROG.
G \ H] or
[the Number buttons].
5
Press [REC I] to start recording.
To temporarily stop recording or to resume it,
press [PAUSE F].
After the unit has been in pause mode for 5
minutes, it will stop automatically to protect the
tape and the video head from damage.
6
Press [STOP C] when the recording
is completed.
VHS Functions
VHS VHS VHS
Tape speed Recording / Playback Time
Type of tape E60 E120 E180 E240
SP mode 1 hour 2 hours 3 hours 4 hours
LP mode 2 hours 4 hours 6 hours 8 hours
VHS VHS VHS
In
tro
d
u
c
tio
n
Con
n
ec
ti
on
s
B
asi
c Setup
P
layb
ack
Ed
iti
n
g
O
the
rs
Fu
nct
ion
S
e
tu
p
Reco
rd
in
g
VH
S Fu
nc
ti
on
s
E3NG0FD_EN.book Page 93 Wednesday, January 30, 2008 10:37 AM