Toshiba RD-XV48DTKF - Manual (Page 24)

24 EN
Initial Setting
When you turn on this unit for the first time, you need
to follow these steps.
1
Press [
B ON\STANDBY].
2
Turn the TV on. Select the input to
which the unit is connected.
“Réglage initial” will automatically appear.
3
Select your desired language for the
OSD using [
U \ D]. Then press
[ENTER] to go to the next step.
4
Select your desired country to the
channel plan using [
U \ D]. Then
press [ENTER] to go to the next step.
5
Select your desired channel preset
type using [
U \ D]. Then press
[ENTER].
The unit will start getting channels available in
your area.
Digital tuning:
Only the DVB channels receivable in your area
are automatically scanned and memorised.
Digital & Analog tuning:
Both analogue and DVB channels receivable in
your area are scanned and memorised
automatically.
Analog tuning:
Only the analogue channels receivable in your
area are automatically scanned and memorised.
• If no channel has been memorised, the antenna
confirmation display will appear. Press [ENTER] to
start auto scanning again or press [RETURN] to
cancel the initial settings.
6
After finishing channel setting,
“Clock Setting” will appear. Then
press [ENTER].
• If you want to adjust the clock, follow to step 5
on page 36 in “Manual Clock Setting”.
7
Press [ENTER] to exit.
Basic Setup
Réglage initial
Langue Aff. écran
Français
English
Español
Deutsch
Italiano
Initial Setting
Country
France
Spain
Germany
Italy
Switzerland
Initial Setting
Auto Tuning
Make sure the antenna is
connected to “ANTENNA IN” jack.
Digital tuning
Digital & Analog tuning
Analog tuning
0 : 00
01 / 01 / 2008
Clock Setting
(TUE)
E3NG0FD_EN.book Page 24 Wednesday, January 30, 2008 10:37 AM