Toshiba RD-XV48DTKF - Manual (Page 47)

47 EN
The error numbers indicate:
• Timer programme with an error number will be
cleared once the entry screen for the
programme is displayed.
Hints for the Timer Recording
• If there is a power failure or the unit is unplugged for
more than 30 seconds, the clock setting and all
timer settings will be lost.
• If a disc is not inserted or if a inserted disc is not
recordable (finalised DVD-RW/-R, finalised DVD+R,
a fully recorded disc, etc.), the unit will perform the
alternate recording to the HDD. (See page 45.)
• When a timer recording is completed, the unit will
ask you whether to turn off the unit if there is no
timer recording which starts within 4 minutes, except
under conditions listed below.
- During playback of HDD or DVD.
- While displaying menus or information on the
screen.
• The unit will be turned off automatically if you select
“Yes” or if you do not reply in 1 minute.
• When the programmed starting and ending time are
earlier than the current time, the setting will not be
accepted.
• The audio language which is selected in the “DVB
Menu” will be recorded for the timer recording of
digital TV broadcasting.
• Timer recording whose recording time exceeds 12
hours cannot be made.
• It is prohibited to turn off the unit from 4 minutes
before the programmed starting time.
• It is prohibited to change channel from 15 seconds
before the programmed starting time.
• [REC I] does not work from 2 minutes before the
programmed starting time. If it comes to 2 minutes
before the starting time during regular or one-touch
timer recording, the recording in progress will be
stopped.
• Playback of DVD/CD is prohibited from 2 minutes
before the programmed starting time when the
recording media is DVD. If it comes to 2 minutes
before the programmed starting time during DVD/
CD playback, the playback will be stopped.
• When 2 or more programmes are overlapped,
“Timer programme overlapped” appears, and the
overlapped programme will be displayed in blue. To
correct the timer programme refer to “Checking,
Cancelling or Correcting the Timer Programming
Information” on page 46.
• If the Start time is earlier and the End time is later
than the current time, the recording will start
immediately after you press [ENTER] at step
9 on
page 45.
E1–E22,
E37–E39 : Recording error
E23–E24 : Unrecordable disc
E25/E51 :
:
• Copy prohibited programme
• Cannot record because of the NTSC
/ PAL-60 signal is received.
E26–E28 : Copy prohibited programme
E29
: Disc protected
E30 : Disc full
E31 : Already recorded 99 titles (Video
mode)
E32 : Already recorded 99 titles (VR mode)
E33 : Already recorded 999 chapters
E34 : No space for Control Information
E35 : PCA (Power Calibration Area) full
E36 : Already finalised Video format disc
E40 :
:
• There are some unrecorded parts
due the overlapped timer
programmes.
• Recording did not start at the start
time.
E41 : Power failure
E42 : No disc
E43 : Already 49 titles recorded
(+VR mode)
E44 : Already 254 chapters recorded
(+VR mode)
E45 : Copy prohibited programme
E46 : It is impossible to record additionally
on a disc recorded by other units
when setting “Make Recording
Compatible” to “OFF”. (+VR mode)
E47 : Already 600 titles recorded on the
HDD.
E49–E50 : HDD recording is cancelled due to the
insufficiency of the disc space on the
HDD.
In
tro
d
u
c
tio
n
Con
n
ec
ti
on
s
B
asi
c Setup
P
layb
ack
Ed
iti
n
g
O
the
rs
Fu
nct
ion
S
e
tu
p
Reco
rd
in
g
VH
S Fu
nc
ti
on
s
E3NG0FD_EN.book Page 47 Wednesday, January 30, 2008 10:37 AM