Toshiba RD-XV48DTKF - Manual (Page 25)

25 EN
Channel Setting
You can retune this unit or edit the channel setting
with following methods.
Auto Tuning (DVB & ANALOG)
Programme the tuner to scan both analogue and DVB
channels you can receive in your area.
1
In stop mode, press [SETUP]. Select
“General Setting” using [
U \ D],
then press [ENTER].
General Setting menu will appear.
2
Select “Channel” using [
U \ D],
then press [ENTER].
3
Select “Auto Tuning (DVB &
ANALOG)” using [
U \ D], then press
[ENTER].
The unit will start storing channels available in
your area.
Wait for several minutes to finish channel storing.
• Analogue channels will be stored in channel
901-999 after it is scanned by this unit.
4
Press [SETUP] to exit.
You can select only the channels memorised in
this unit by using [PROG.
G \ H].
To cancel auto tuning
Press [RETURN] or [SETUP] during scanning.
Note
• The selection will be affected by how you receive TV
channels in your local area.
• If the auto tuning is cancelled during scanning,
some channels not yet tuned may not be received.
• You cannot change the channel when this unit is in
any recording mode (normal recording, One-touch
Timer Recording or timer recording).
Auto Tuning (ANALOG)
Programme the tuner to scan only the analogue
channels you can receive in your area.
1
In stop mode, press [SETUP]. Select
“General Setting” using [
U \ D],
then press [ENTER].
2
Select “Channel” using [
U \ D],
then press [ENTER].
3
Select “ANALOG Channel Setup”
using [
U \ D], then press [ENTER].
4
Select “Auto Tuning” using [
U \ D],
then press [ENTER].
The unit will start storing channels available in
your area.
Wait for several minutes to finish channel storing.
• Analogue channels will be stored in channel
901-999 after it is scanned by this unit.
5
Press [SETUP] to exit.
You can select only the channels memorised in
this unit by using [PROG.
G \ H].
To cancel auto tuning
Press [RETURN] or [SETUP] during scanning.
Note
• The selection will be affected by how you receive TV
channels in your local area.
• If the auto tuning is cancelled during scanning,
some channels not yet tuned may not be received.
• You cannot change the channel when this unit is in
any recording mode (normal recording, One-touch
Timer Recording or timer recording).
• Sorting of TV channels from 901 to 906 will be
performed automatically as follows.
General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All
Auto Tuning (DVB & ANALOG)
DVB Channel Setup
ANALOG Channel Setup
Country
ANALOG
901: TF1 902: F2 903: F3
904: CANAL+ 905: F5/ARTE 906: M6
ANALOG Channel Setup
Auto Tuning
Manual Tuning
Move
In
tr
od
uc
ti
on
Co
nn
e
c
tio
n
s
Basi
c Setup
Pl
ayb
ack
Ed
iti
n
g
O
the
rs
Fu
nct
ion
S
e
tu
p
Re
c
o
rd
in
g
V
H
S
Fu
nc
ti
on
s
E3NG0FD_EN.book Page 25 Wednesday, January 30, 2008 10:37 AM