Toshiba RD-XV48DTKF User Manual
Page 45
45
EN
5
Select the channel number to record
using [
U \ D], then press [P].
To record from the external input, select “AV1”,
“AV2”, or “AV3”.
6
Select the recording media (“HDD”
or “DVD”) using [
U \ D], then press
[
P].
7
Select the recording mode using
[
U \ D], then press [P].
Refer to “Recording Mode” on page 37.
8
For DVB channel recording:
Select “STTL” to “ON” or “OFF”
using [
U \ D].
If you set “STTL” to “ON”, subtitle will be recorded
too.
• When analogue channel is selected, “VPS/PDC”
will be displayed instead of “STTL”.
For analogue channel recording:
Select “VPS/PDC” to “ON” or “OFF”
using [
U \ D].
Refer to “VPS (Video Programme System) / PDC
(Programme Delivery Control)” on page 46.
• When DVB channel is selected, “STTL” will be
displayed instead of “VPS/PDC”.
• VPS/PDC system is only available for HDD.
• VPS/PDC system is not available for “Daily” and
“M-F” timer programme.
9
Press [ENTER] when all information
required is entered.
Your programme setting is stored.
• To set another programme, repeat steps
.
• To exit, press [TIMER PROG.].
• When 2 or more programmes are overlapped,
“Timer programme overlapped” appears, and
the overlapped programme will be displayed in
blue. To correct the timer programme, refer to
“Checking, Cancelling or Correcting the Timer
Programming Information” on page 46.
The
icon will appear on the front panel display.
Note
• If you have not set the clock, the clock setting
window will appear instead of the Timer
Programming list. Continue from step
Clock Setting” on page 36 before programming the
timer.
• Press [
U \ D] to move the cursor in “Timer
Programming” list.
• If you have a timer programme with VPS/PDC
function, and if you are watching different channel
from the timer programme, confirmation message to
change the channel will appear 15 minutes before
the programme starts (the message will also re-
appear 30 seconds before the programme starts).
The channel will automatically be changed to the
programmed channel 15 seconds before the
programme starts.
Alternate recording (DVD only)...
If there is no recordable disc in the unit, if the disc
does not have enough space to complete the
recording, or if the material is “copy-once” programme
and prohibited to be recorded on a DVD in the unit,
the unit will detect it and automatically record to the
HDD even when DVD is selected as the recording
media. If the available space on the HDD is less than
that of DVD, the unit will not perform the alternate
recording. This feature is available only for timer
recording. Not available for one-touch timer recording.
1/1
06/12
0:00
06/12
07/12
07/12
7:00
9:00
17:00
9:00
9:30
18:00
18
190
901
Timer Programming
THU
Date
Start
End
CH
New Programme
STTL
VPS/PDC
In
tro
d
u
c
tio
n
Con
n
ec
ti
on
s
B
asi
c Setup
P
layb
ack
Ed
iti
n
g
O
the
rs
Fu
nct
ion
S
e
tu
p
Reco
rd
in
g
VH
S Fu
nc
ti
on
s
E3NG0FD_EN.book Page 45 Wednesday, January 30, 2008 10:37 AM