MF Digital Teaс P-55 - Manual (Page 41)

SECTION 14 : Getting Label Print Job Started
41
8 ) After the second pattern has been printed, take out
the medium .
NOTE
- The upper and lower test patterns relative to the center hole are the same, and so are the left
and right test patterns.
- The upper and lower scales relate to vertical adjustment and the left and right scales relate to
horizontal adjustment.
9) Pairs of longer and shorter lines are printed along the
vertical and horizontal scales. Determine which pair
of longer and shorter lines is aligned (or which pair of
lines has the slightest displacement between), enter
the corresponding values in the Horizontal and
Vertical boxes on the Maintenance tab, and click OK.
(In our example, you need to enter 8 in the Vertical
box.)