Toshiba GA-1120 - Manual (Page 90)

4
4-38 Performing Setup from the Control Panel
Save Changes
Yes/No [Yes]
Select Yes to activate any changes made in the Printer Setup; select No to return to the
main Setup menu without making any changes.
PostScript Setup options
PS (PostScript) Setup allows you to set defaults for the GA-1120. Users can override
most of these defaults on a job-by-job basis. However, users printing from UNIX or
DOS command lines cannot override defaults from their applications. Therefore, you
must set defaults in PostScript Setup. For information about these defaults, see the
Printing Guide .
T O ACCESS P OST S CRIPT S ETUP OPTIONS
In the list of options that follows, default values, where applicable, appear in square
brackets.
Convert Paper Sizes
No Letter/11x17->A4/A3 A4/A3->Letter/11x17 [No]
Specify whether to convert paper sizes in documents automatically to the default paper
sizes specified. For example, if you select Letter/11
x 17->A4/A3, a letter size document
is automatically printed on A4 paper.
N OTE : This option works in conjunction with the Default Paper Sizes option. For
example, if Convert Paper Sizes is set to Letter/11 x 17->A4/A3, and Default Paper Sizes
is set to US, then jobs are printed A4/A3 size. This also includes GA-1120 system
pages such as the Start Page, Test Page, and Job Log.
Toner Reduction
On/Off [Off]
Specify whether to minimize the effects of “blasting”, which occurs when excess
amounts of toner on certain media types “blast” beyond the color density boundaries
defined in the print job.
1. In the main Setup menu, choose PS Setup.
2. Enter the options appropriate to the printing requirements at the site.
3. When you have finished, save changes.