Toshiba GA-1120 - Manual (Page 59)

4
4-7 GA-1120 Control Panel
Suspend Printing Suspend communication between the GA-1120 and the copier. You must suspend
printing if you want to interrupt the current GA-1120 job and use the copier to
make copies or print another job first. Jobs continue to process on the GA-1120.
After you make the copies, select Resume Printing to continue printing jobs from
the GA-1120.
Resume Printing Resume communication between the copier and the GA-1120 after you have
finished making copies or printing other jobs.
Shut Down Shut down all GA-1120 activity in the correct manner and then restart. Use this
option instead of the power switch on the back of the GA-1120. The following
options are available from the submenu that appears:
Restart Server —Restarts the Fiery system software without shutting down the
GA-1120 operating system.
Shut Down System —Shuts down the Fiery system software and the GA-1120
operating system.
Reboot System —Shuts down and restarts the Fiery system software and the
GA-1120 operating system.
Clear Server Clear all jobs in all server queues, as well as all jobs archived on the GA-1120 hard
disk, the index of archived jobs (in the Archive window), all FreeForm masters, and
the index of FreeForm masters (in the FreeForm window). Check with your
administrator or operator before choosing Clear Server. If an Administrator password
has been set, you must enter it to access Clear Server.
Run Setup Enter the Setup menu and change Setup option settings.
Run Diagnostics This function is provided for service representatives only. For information about
running diagnostics, contact your authorized service/support technician.
Calibration Calibrate the GA-1120 using AutoCal. For more information, see the Color Guide . If
an Administrator password has been set, you must enter it to access Calibration.