Toshiba TEC H-9000 - Manual (Page 83)

12. OPERATING PROCEDURES
12.13 FLOATING VENDOR
12-21
(2) Restraints in case of clerks’ name printing on labels
1)
“GRADE LINE” can not be selected and printed.
2) Commodity name can not be printed on the 4th line of 57 mm eidth label and 2nd line of 48
mm width label, because 1 line of commodity is used for clerk’s name printing.
3) The printing position of clerk name will be selected by the initial setting for GRADE LINE
position.
Initial 3-6 (G. Line Print Position)
0: Right side on bottom line of commodity name
1: Left side on bottom line of commodity name
If you would like to switch the initial setting # please contact your authorized TOSHIBA TEC
representative.
Price deletion
Prices already registered can be deleted in the following procedure.
Subtotal
The following procedure will sum up all of the registered items.
VOID
PRT
*
Enter vendor #.
NEXT
PLU
or
VOID
C
Enter the deletion mode.
NEXT PLU: the next item
VOID: the previous item
Delete a registered price.
Exit the deletion mode.
PRT
*
Press:
C Press:
(Cancel)
Press:
Enter vendor #.
Enter prices.
A receipt will be issued.