Toshiba TEC H-9000 - Manual (Page 42)

9. PROGRAMMING PROCEDURES
9.12 DATE/TIME SETTING
9- 20
9.12 DATE/TIME SETTING
Menu Page: 2
Item No.:
1
Date, time, machine number, and store code are set with this procedure.
9.13 CMT/PL-3
Menu Page: 2
Item No.:
2
CMT Operations
The H-9000 is designed to interface with a Cassette Magnetic Tape loader. This loader allows the transfer
of the entire PLU file, ingredient file and other data from the H-9000 to tapes. This can be accomplished in
number of operation steps.
In turn, information from the tape can also be transferred to another H-9000 printer.
1
k
Page 2
PROG.
ESC.
Page 2
Main
Set the date.
(Month, Day, Year)
Set the machine No.
(max. 6 dig.)
ENTER
k
ENTER
ENTER ENTER
Set the time.
(Hour, Minute)
Set the store No.
(max. 5 dig.)
NOTES:
1. Express the time in a 24-hour military format.
2. The H-9000 will check details of date (time) input, and any wrong date (time) will result in
an error mode. Then the correct date (time) should be re-entered and press the
key.
3. Even when initial Set 8-4, 8-5 or 8-6 is set to the Julian Date side, the way to enter the
date in the date setting operation is the same as in the ordinary case.
4. The date display method can be changed by the initial setting.
CLEAR
2
Page 2 PROG.
ESC.
Page 2
Main
Set the transmission items.
(Refer to table 4)
ENTER
NEXT
PLU
or
NOTES:
1. The error mode can be released by pressing the key, and operated again
through the above steps.
2. Use the metal cassette tape which is commercially available and has a capacity of 45 or
60 minutes recording.
3. For operations of the CMT loader, refer to the instruction manual provided with the CMT
loader.
CLEAR