Print count operation, 4 print count operation – Toshiba TEC H-9000 User Manual
Page 68
12. OPERATING PROCEDURES
12.4 PRINT COUNT OPERATION
12- 6
12.4 PRINT COUNT OPERATION
With this procedure, a specified number of the same labels can be issued.
Menu: REG., M.DOWN, or REWRAP
Mode: WEIGH, FIX or BY-COUNT
Example A)
When operating in Weigh mode.
*: Available only when the optional scale unit is connected.
*
NOTES: 1. A batch issue means to print labels continuously with the backing paper attached.
On-demand issue means to print label one by one.
2. To check the remaining number, clear the PLU and press the
key.
Place a commodity
on the platter.
(Ex. 0.700 lb.)
The label is issued with the
backing paper attached.
The label is issued.
When all the specified numbers
of the labels are being issued.
Remove the commodity.
Press :
Set the number of labels.
(Max. 99 labels)
Press :
Enter the PLU #.
Press :
PLU data is saved.
MANUAL :
: AUTO
Batch
On-demand
Clear the preset count.
Press :
5
0
PRESET
COUNT
3
0
9
1
PLU
SAVE
C
PRESET COUNT
PRT
*
©
PRT
*
©
PRT
*
*