Toshiba TEC H-9000 - Manual (Page 10)

2. SPECIFICATION
2.2 OPTION
2- 2
2.2 OPTION
Option Name
Model No.
or Part No.
Description Source
LON Connector
TM8P-88P Part No.
EAJ-0028001 A modular connector used to connect printers or
scales to each other in a LON configuration. See
Note 2
LON Terminal
Resistor 285D-8P
Part No.
EAJ-0029001 A modular resistor attached to the printers or
scales connected at both ends of the LON
configuration. See
Note 2
LON
LON Cable
S-STLAN-2P
(200 m/roll)
Part No.
10319100003 An 8-pin telephone cable used with the LON
connectors attached to both ends of the cable.
This cable connects printers or scales to each
other in a LON configuration. See
Note 2
I/O PC Board
OP-9000-IOB An I/O board equipped with the TMCC interface
and PC-AT keyboard interface ports. It is used
to construct a TMCC system and program PLU
data, etc.. See
Note 1
TMCC
TMCC Cable Kit
OP-9000-IOCN-
TMCC
A cable kit for the TMCC interface. See
Note 1
Scale unit
OP-9000N-30M-
US
Connecting this optional scale unit enables the
H-9000N to be used as a scale printer. See
Note 1
Memory Module
OP-9000-SRAM-
512KB
DIP type S-RAM to be installed on the MEMO PC
board (OP-9000-PIGGYBACK-S/F) for memory
expansion. When expanding the memory,
install the two modules as one set. See
Note 1
and 3
10 Base T (LAN) Interface
Board (SL-9000N only)
OP-9000N-LAN This board enables the H-9000N to be used in a
LAN network. See
Note 1
Drawer
DRW-FT70 When connected to the H-9000, it allows
transaction with cash just like a cash register. See
Note 1
NOTES:
1. Contact TOSHIBA TEC H.Q. or your nearest TOSHIBA TEC representative.
2. Order from TOSHIBA TEC Parts Center or purchase locally.
3. When purchasing memory modules locally, select one having the following specifications.
Maker: HITACH Static RAM (OP-9000-SRAM-512KB)
Type:
HM628512ALP-770ns, 600mil 32-pin Plastic DIP (DP-32) (OP-9000-SRAM-512KB)