Toshiba F25Series - Manual (Page 71)

71 Getting Started
Connecting external display devices
5.375 x 8.375 ver 2.3
Using a poor-quality cable may result in a dull or fuzzy
picture, poor color, ghosting, video noise, or loss of video.
Connecting a standard television, projector, or VCR/
DVD player
S-video cables are not included with your computer. To
connect a device to the S-video Out port, you will need to
purchase an S-video cable.
To connect a standard television, projector, or VCR/DVD
player:
1 Connect one end of the video cable to the external video
device.
Refer to the documentation provided with the device for the
location of its Video In port.
2 Connect the other end of the video cable to the S-video
Out port on the left side of the computer.
3 Turn on the external video device. Make sure the input to
the device is correctly set for the S-Video port. (See the
device’s documentation for more information.)
4 On your computer, press the TV Out button, or toggle the
display using the Fn+ F5 hot key combination. (The TV
Out button is located above and to the right of the
keyboard.)
If you do not see the image transfer from your computer screen
to the external video device, modify the Display Properties as
described in “Adjusting the Display Properties” on page 72.
NOTE
NOTE