Toshiba F25Series - Manual (Page 64)

64 Getting Started
Adding memory
5.375 x 8.375 ver 2.3
Do not force the memory module into position. The memory
module should be level when secured in place.
The clips on either side of the memory module will click to
secure the memory module.
14 Replace the memory module slot cover and tighten the
screw.
15 Turn the computer over and restart it.
TECHNICAL NOTE: You must have at least one memory
module installed for the computer to work.
You can now continue setting up the computer. When the
operating system has loaded, you can verify that the
computer has recognized the additional memory module.
If you are adding an extra memory module after setting up the
computer, verify that the computer has recognized it correctly
as described in
“Checking total memory” on page 66 .
Removing a memory module
If you need to remove a memory module:
1 Complete steps 1 – 6 in “Installing a memory module” on
page 59 to shut down the computer and open the memory
module slot cover.