Lamp unit replacement and care (continued), En glis h, Appendix – Toshiba 42HM66 User Manual

Page 33: Disposing of the used lamp unit, How to replace the lamp unit (continued)

glis

Appendix

8. Reattach the lamp unit door, making sure to insert the

hooks on the left side of the lamp unit door inside the

opening in the TV cabinet.

Insert the hooks inside

the TV cabinet opening.

Lamp unit door

Disposing of the used lamp unit

• Place the used lamp unit in the empty box from the new unit.
• Keep the lamp unit out of reach of children and pets.

The lightning symbol in the triangle tells you that the
voltage inside this product may be strong enough to
cause an electric shock. DO NOT TRY TO SERVICE
THIS PRODUCT YOURSELF.

The exclamation mark in the triangle tells you that
important operating and maintenance instructions
follow this symbol.

CAUTION:

Always handle the lamp unit with care.

The lamp unit in this TV was designed for safe replacement by

consumers; however, if the lamp unit is subjected to intentional

or accidental abuse (such as excessive mechanical abuse or handling by

children or pets), the unit may break, exposing sharp edges or pinch points.

CAUTION:

NEVER clean a hot lamp with any

type of flammable liquid or aerosol cleaning agent.
Many ordinary cleaning agents (such as glass

cleaners) contain chemicals that may be flammable at certain
temperatures. If the lamp unit is not allowed to cool for at least
one (1) hour, such chemicals may ignite.

Lamp unit screws

(Slotted screwdriver)

CLEANING THE LAMP UNIT GLASS

If you accidentally touch the lamp unit glass or otherwise

get it dirty, wipe it with a lint-free lens cleaning cloth (such

as a cloth for cleaning camera lenses or eyeglasses).

7. Using a Slotted screwdriver, tighten the two lamp unit

screws.

Note: Hand-tighten only. Do not use an electric screwdriver.

How to replace the lamp unit (continued)

6. Carefully insert the new lamp unit straight into the TV until

it is fully seated.

Note :

• Never subject the lamp unit to excessive shock.

• Never touch the lamp unit glass or otherwise get it dirty.

Doing so may affect the image quality and reduce the service life
of the lamp. See “Cleaning the lamp unit glass” below.

NOTE :

Make sure the lamp unit and screws

are installed securely; otherwise, the TV may not
turn on and the lamp life may be shortened.

10. Plug in the power cord and turn on the TV. After the initial

warmup period (which may take several seconds for full

picture brightness), the TV should operate normally. If any

of the following conditions exist, turn off the TV, unplug the

power cord, and repeat steps 1–9 to ensure that the lamp

unit and lamp unit door are installed correctly:

• No picture • Dark picture • TV will not turn on

If, after repeating steps 1–9, the problem still exists:

Call Customer Service at 1-800-631-3811.

9. Replace the screw and tighten using a Slotted

screwdriver.

• Dispose of the used lamp unit by the approved method for

your area.

NOTE :

The lamp unit contains mercury. Disposal

of mercury may be regulated due to environmental

considerations. For disposal or recycling information, contact your

local authorities or the Electronic Industries Alliance (www.eiae.org).

The lightning symbol in the triangle tells you that the
voltage inside this product may be strong enough to
cause an electric shock. DO NOT TRY TO SERVICE
THIS PRODUCT YOURSELF.

The exclamation mark in the triangle tells you that
important operating and maintenance instructions
follow this symbol.

Lamp unit replacement and care (continued)

Screw

Lamp unit door

NOTE :

Make sure the lamp unit door is

installed securely, otherwise, the TV may not
turn on.