En gl ish, Using the remote control – Toshiba 42HM66 User Manual

Page 14

ish

Programming the TV's universal remote

control to operate your other devices

You can program the TV's remote control to operate up to four different

devices—one for each mode button (TV, VCR, CBL, and AUX ).
The "TV" mode button on the remote control (see item 6 on page ) is

already programmed to operate your TV. (The TV's device program code

is 69).

To program the remote control to operate another device:
. Find the code for the other device in the "Device program codes" table

on pages –8.

. Manually turn on the device (using the POWER button on the device

and not the remote control).

. Press the mode button you want to program on the remote control (TV,

VCR, CBL, and AUX).

4. Press and hold SET on the remote control until the LED flashes twice.
. Use the Channel Number buttons to enter the code for your device.

• If the LED does not flash twice, repeat steps 3–5 using another code,

if there are other codes listed for your device. (If there are no other

codes listed for your device, you will not be able to program the TV

remote control to operate your other device and will need to use the

device's remote control.)

• If the code is accepted, the LED flashes twice after the last digit is

entered.

6. Point the remote control at the device and press POWER on the remote

control. If the correct code has been programmed, the device will turn

off. If the device does not respond, repeat steps – using another

code.
• If the code is accepted, the LED flashes twice after the last digit is

entered.

. Repeat these steps for other devices you want to operate using the TV

remote control.
Note:
• Even after the TV remote control is programmed, it may not operate certain features

on your other device. If this happens and you wish to use those features, you will

need to use the device’s original remote control.

• In some cases you may not be able to operate your device with the TV remote

control. Your other device may use a code that is not recognized by the TV remote

control. If this happens, use the device’s remote control.

Using the Remote Control