TRENDnet TW-H6W1IR - Manual (Page 97)

TW-H6W1IR ISDN Remote Router
Configuration and Management 89
will be recognized by the interface in the Global Interface
parameter.
??
Range – this is the range of contiguous, global addresses above
(and including) the base Global IP.
??
Local IP – an IP Address that is only used in the stub domain since
it is not unique. It is the base, local address for the local addresses
that will be recognized by the interface in the Local Interface
parameter.
??
Range – this is the range of contiguous local addresses above (and
including) the base Local IP.
??
State – this toggles the enable, disable, for this NAT entry.
Dynamic NAPT
This screen (below) is how the NAT IP Pool appears, if Dynamic
NAPT was chosen for the Translation Mode parameter. Each entry,
in this configuration, can be used to map a single global address and
multiple, contiguous local addresses to each other.