TRENDnet TW-H6W1IR - Manual (Page 31)

TW-H6W1IR ISDN Remote Router
Installation 23
1. The LAN port must be enabled in the Interface
Configuration sub-menu.
? ?
Choose Interface Configuration, LAN.
? ?
Position the cursor over the State item and press bar>. The State will change from Disable to Enable.
? ?
Position the cursor on the Save option at the bottom of the
screen and press to save the new setting.
? ?
Choose Exit in the sub-menus to return to the Main Menu.
2. Enable IP Networking
? ?
Choose Network Configuration, IP
Configuration.
? ?
Position the cursor over the last item IP Networking
and press to Enable it.
? ?
Position the cursor on the Save option at the bottom of the
screen and press to save the new setting.
3. Assign an IP address to the LAN port in the Network
Configuration sub-menu of the Main Menu.
? ?
Still in Network Configuration, IP
Configuration
submenu from Step 2 above, choose IP
Stack Configuration, LAN.
? ?
Enter a valid IP address for the LAN in the first item. You may
also enter a Netmask if you wish. For more information about IP