TRENDnet TW-H6W1IR - Manual (Page 110)

TW-H6W1IR ISDN Remote Router
102 Configuration and
Management
Items in the Multi-Link PPP Configuration window are described as
follows:
? ?
Bandwidth on Demand – Enables/disables BOD. When enabled,
BOD will manage the implementation of MLPPP using the
parameters defined in this window.
? ?
BOD Criteria – Either [TX], [RX] or [TX+RX], where TX is
Transmit and RX is Receive. The parameter defined here is used
when monitoring the BOD High Threshold and BOD Low
Threshold.
? ?
BOD High Threshold (%) – (0 to 100) The throughput value as
a percentage of total bandwidth which will cause the next ISDN
port having Multi-Link PPP enabled to dial up and add bandwidth
to the connection. This value, however, must be constantly
exceeded for the time designated in the Add Bandwidth Delay
field before the next ISDN port dials out.