TRENDnet TW-H6W1IR - Manual (Page 80)

TW-H6W1IR ISDN Remote Router
72 Configuration and
Management
??
Operation – this comparison operation is applied to the destination
port (the Dst Port parameter) value, of the TCP or UDP header.
??
ICMP Type – this is the type field, in the ICMP header, used to
identify a particular ICMP message.
??
ICMP Code – this is the code field, in the ICMP header, used to
further specify the ICMP type.
??
TCP Flag – this is a hex number, representing the six flag bits in the
TCP header. The value range is from 0 to 3F.
Multiple Home Configuration
Besides the IP address assigned to the LAN interface in the Network
Configuration menu, the LAN may have up to 3 additional IP
interfaces. These additional IP interfaces are referred to as MIP1 to
MIP3. This type of configuration is known as a multiple home
configuration.
Multiple Home can be demonstrated by this example: