TRENDnet TW-H6W1IR - Manual (Page 96)

TW-H6W1IR ISDN Remote Router
88 Configuration and
Management
??
State – enables/disables this NAT configuration.
NAT IP Pool Configuration Screen
Now you must select, enter, and configure the NAT IP Pool from the
NAT Configuration sub-menu, shown below.
Dynamic NAT
This screen (below) is how the NAT IP Pool appears, if Dynamic
NAT was chosen for the Translation Mode parameter. Each entry, in
this configuration, can be used to map multiple, contiguous global
addresses and local addresses to each other.
The parameters are described below:
??
Global IP – an IP Address that is globally unique and valid on the
Internet. It is the base, global address for the global addresses that