beautypg.com

Using telnet, Telnet configuration – TRENDnet TW-H6W1IR User Manual

Page 141

background image

TW-H6W1IR ISDN Remote Router

Using Telnet

133

Using Telnet

The TW-H6W1IR router can be configured and managed using telnet.
Telnet accesses the same built-in configuration program as the RS-232
Diagnostic port console connection. As such, all settings that can be
adjusted through the console can also be configured using Telnet.

Telnet Configuration

In order to use telnet, the TW-H6W1IR router must first be configured
using a console connected to the RS-232 Diagnostic port. Depending
on the placement of the management station using telnet, the initial
configuration requirements for the router are as follows:

Using Telnet via LAN

Preparing the router for management by telnet over the LAN only
requires enabling the LAN port, enabling telnet, and assigning the LAN
port an IP address. To do this:

1. Connect a console to the RS-232 Diagnostic port on the front

panel of the router and run a terminal emulation program (for more
information, see Connecting the Console to the Router and
Setting Up the Console sections of this manual).

2. Enable the LAN port in the Interface Configuration

sub-menu.