TANDBERG D1320203 User Manual
Page 5
TANDBERG 3G Gateway
Data port Command Interface User Guide
D1320203
5
If communication cannot be established between the PC/terminal and the TANDBERG 3G Gateway’s Data
port the following should be checked:
• Verify that the serial cable is a straight through 9-pin to 9-pin cable
• Confirm that the configuration of the PC/terminal’s serial RS-232 port is identical to the
configuration of the TANDBERG 3G Gateway RS-232 port.
• Verify that the PC/terminal’s serial RS-232 port is working properly by connecting it back-to-back
to another PC/terminal and send characters in both directions
.
1
It requires a null-modem cable to perform this test