TANDBERG D1320203 User Manual
Page 35
TANDBERG 3G Gateway
Data port Command Interface User Guide
EraseDisk
This command wipes all the data from the internal harddisk
Example:
xCommand EraseDisk
*r Result (status=OK):
*r/end
OK
FeedbackDeregister
Command used to deregister XML feedback over HTTP(S).
Parameters:
• ID: <1 .. 3> ID for the registration to deregister.
OK Result parameters:
• ID: <1 .. 3>
ERROR Result parameters:
• Cause: <1…> Cause code specifying why the command was not accepted by the system
• Description Textual description of the cause code.
Example:
xCommand feedbackderegister id:1
*r Result (status=OK):
ID: 2
*r/end
OK
FeedbackRegister
Command used to instruct the system to return XML feedback over HTTP(S) to specific URLs.
What parts of the Status and Configuration XML documents to monitor are specified by XPath
expressions. The system supports issuing feedback to 3 different URLs. The system allows a total of
20 XPath expressions to be registered, with a maximum of 15 for a single URL.
Parameters:
• ID: <1 .. 3> ID for the registration. If this parameter is omitted the system uses the first
vacant ID.
• URL(r):
• Expression: 1 .. 15:
OK Result parameters:
• ID: <1 .. 3>
ERROR Result parameters:
• Cause: <1…> Cause code specifying why the command was not accepted by the system
• Description Textual description of the cause code.
Example:
xCommand feedbackregister url:http://10.47.14.185:8000
expression.1:status/call
expression.2:status/conference
D1320203
35