Full menu settings - reset, Is executed, the language selection menu will, Adjustments & settings – Toshiba TLP780E User Manual
Page 52
52
Adjustments &
Settings
FULL MENU settings - Reset
Reset all
Return the adjustments and settings of all menus to the factory default setting.
EXEC.
Horizontal reference value reset
The horizontal reference value for "Auto. V-keystone" is calibrated automatically.
EXEC.
• You can return the adjusting and setting values of all menus to the factory default settings. ("Horizontal reference value reset" below also returns to the
value of at the factory default setting.)
• The projector stores the standard conditions of horizontal installation, but depending on the using environment (if the projector is subject to vibrations or
shock, etc.), the standard may change.
If the keystone distortion is not corrected properly when "Auto. V-keystone"
is executed with the screen installed vertically, put the projector's foot
and set the projector on a flat surface, then execute "Horizontal reference value reset" function.
Notes
• If the projector's foot adjuster is used or the projector is inclined, “Horizontal reference value reset” will not be executed properly.
• The settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is unplugged or if a
power failure occurs while the projector is on, the settings are not memorized.