5 backup & restore, Introduction, Saving your current configuration – Technicolor - Thomson 605 User Manual
Page 68: Restoring a previously saved configuration, Backup & restore, Chapter 4
Chapter 4
Basic Configuration
E-DOC-CTC-20050429-0104 v1.0
58
4.3.5 Backup & Restore
Introduction
This page allows you to:
Save your current configuration.
Restore a previously saved configuration.
Accessing the Backup
& Restore page
Proceed as follows:
1
On the SpeedTouch menu, click Configuration.
2
Click Configure.
3
In the Pick a task... list, click Save or Restore Configuration.
Saving your current
configuration
Proceed as follows:
1
Click Backup Configuration Now.
2
Click Save.
3
Choose a location to save your backup file and click Save.
Restoring a previously
saved configuration
Proceed as follows:
1
Click Browse.
2
Select the configuration file you want to restore and click Open.
3
Click Restore Configuration Now....
4
The SpeedTouch™ loads your configuration and restarts.
5
At the end of the procedure, the SpeedTouch™ returns to the
page.