Technicolor - Thomson 605 - Manual (Page 101)

Chapter 4
Basic Configuration
E-DOC-CTC-20050429-0104 v1.0
91
4.6.4 Wireless Device Settings
Accessing the wireless
device settings page
Proceed as follows:
1 On the Office Network menu, click Devices.
2 In the Detected Device(s), click the name of the wireless device you want to
view.
Overview The Overview page displays following information:
Information
allows you to view:
Status
displays whether the device is currently connected to the
SpeedTouch™ network.
Type displays the device type.
Connected To displays the interface to which the device is currently
connected.
Allowed on LAN
indicates whether the wireless client is allowed to
connect to the SpeedTouch™ WLAN.
Addressing
allows you to view:
Physical Address
displays the MAC address of the device.
IP Address Assignment
displays whether the device is using a static or
dynamic IP address.
IP Address
displays the current IP address of the device.
Always use the same address
indicates whether the wireless client has a
static DHCP lease or not.
DHCP Lease Time displays the time for which the wireless client can use
this IP address.
Connection Sharing
:
Gives you an overview of the games or services that are currently assigned to
this device. Click the name of the game or service to view the used port
mappings.
For more information, see
“4.5.4 Game or Application Definition” on page 71 .
Configure The Configure page allows you to:
Change the device information.
Assign a static DHCP server lease to this device by selecting the Always use
the same address
check box.
Allow a game or service running on this device to be initiated from the Internet.