1 wireless basics, Introduction, 11b/g – Technicolor - Thomson 605 User Manual
Page 32: Wireless fidelity, Access point, Network name or ssid, Radio channels, Wireless basics, Chapter 2
Chapter 2
Local Network Setup
E-DOC-CTC-20050429-0104 v1.0
22
2.2.1 Wireless Basics
Introduction
In this section some key wireless concepts are explained.
802.11b/g
802.11b is an IEEE standard, operating at 2,4 GHz at a speed of up to 11 Mb/s.
802.11g, a newer IEEE standard also operating at 2,4 GHz, gives you up to 54 Mb/s
speed, more security and better performance.
Wireless Fidelity
The Wi-Fi certification ensures that your SpeedTouch™ will interoperate with any Wi-
Fi certified 802.11g and 802.11b compliant wireless device.
Access Point
The SpeedTouch™ Wireless LAN Access Point (AP) behaves as a networking hub
allowing to wirelessly interconnect several devices to the local (W)LAN and to
provide access to the Internet.
Network Name or SSID
The WLAN's 'radio' link is a shared medium. As no physical connection exists
between the SpeedTouch™ and wireless clients, a name must be given to allow
unique identification of your WLAN radio link. This is done by the Service Set ID
(SSID), also referred to as Network Name. Wireless clients must be part of this SSID
environment in order to be able to communicate with other clients on the (W)LAN -
including the SpeedTouch™.
Radio channels
The 802.11g standard allows several WLAN networks using different radio channels
to be co-located. The SpeedTouch™ supports multiple radio channels and is able to
select the best radio channel at each start-up.
You can choose to set the channels automatically or manually.
The SpeedTouch™ supports all channels allowed for wireless networking. However,
depending on local regulations, the number of channels actually allowed to be used
may be additionally restricted, as shown in the table below:
The different channels are overlapping. To avoid interference with another
access point, make sure that the separation (in terms of frequency) is as
high as possible. It’s recommended to keep at least 3 channels between 2
different access points.
Regulatory Domain
Allowed Radio Channels
China
1 to 13
Europe
1 to 13
Israel
5 to 8
Japan
1 to 14
Jordan
10 to 13
Thailand
1 to 14
USA
1 to 11