3 routed pppoa, Introduction, Creating a routed pppoa connection entry – Technicolor - Thomson 605 User Manual
Page 150: Additional configuration, Routing, Routed pppoa, Chapter 5
Chapter 5
Expert Configuration
E-DOC-CTC-20050429-0104 v1.0
140
5.4.3 Routed PPPoA
Introduction
The Routed PPPoA configuration page allows you to add new Routed PPPoA
connection entries or to change settings of existing entries.
Creating a Routed
PPPoA connection
entry
To add a Routed PPPoA connection entry:
1
Click New.
2
In the Interface box, type a unique interface name (different from the MER
interface name).
3
In the Destination list, click the appropriate Routed Ethernet destination
indicated by the Routed Ethernet interface name
4
Type user name and password for the account at the ISP [optional].
5
Click Apply.
Additional configuration
Once created, per Routed PPPoA connection, additional configuration is possible by
clicking:
Routing
Following fields are available:
Destination
:
Controls the networks that can be reached via this particular PPP connection.
Specify the remote host or network in prefix notation. e.g. 172.16.0.0/16.
Label
:
Allows you to assign a label to this connection.
These parameters can only be modified when the link is down. Take the link
down first by clicking Hang-up.