TANDBERG Media2 Blade MSE 8510 - Manual (Page 14)

10
Calling participants in to a conference
To call participants in to a conference:
1
In the web interface of the Media2 blade, go to
Conferences
and click on the
name of an active conference.
2 On the
Participants
tab, click
Add participant
to call out to an H.323 or SIP
endpoint.
3 In the
Address
field:
where there is no H.323 gatekeeper or SIP registrar, type the IP address,
host name, or SIP URI of an accessible endpoint on your network
if you are using an H.323 gatekeeper, enter the number registered with the
gatekeeper for the required endpoint
if you are using a SIP registrar, enter the number registered with the SIP
registrar for the required endpoint
4 Leave the other fields as their default values and click
Call endpoint
. The
Media2 blade automatically connects to the endpoint.
5 If the endpoint is not configured to automatically answer calls, accept the call on
the endpoint.
Calling in to a conference
Participants can call in to conferences in either one of two ways:
if you have given the conference a numeric identifier and you are using an H.323
gatekeeper or SIP registrar, tell participants to dial the numeric identifier from
their endpoint to join that conference
participants can dial the IP address of the Media2 blade to access the auto
attendant of the Media2 blade. Participants will see a menu of available
conferences on their video screen and will hear instructions