TANDBERG Media2 Blade MSE 8510 - Manual (Page 12)

8
To configure the Media2 blade to use a SIP registrar:
1
In the web interface, go to
Settings > SIP
.
2 Configure the settings you require, using the online help for further assistance.
3 Click
Apply changes
.
Step four: Add endpoints (optional)
One way to add participants to a conference that you create is to have the Media2
blade automatically call them when the conference starts. To do this, you configure
their endpoints on the Media2 blade. When you set up a conference, you can choose
the endpoints from the
Pre-configured participants
list. This is easier than entering
each endpoint’s details every time. Participants that are pre-configured for a
conference will automatically be called by the Media2 blade to join that conference.
To define pre-configured endpoints:
1
In the web interface of the Media2 blade, go to
Endpoints
:
To add a H.323 endpoint, click
Add H.323
To add a SIP endpoint, click
Add SIP
To add a VNC screen, click
Add VNC
2 Configure the endpoint settings you require, using the online help for further
assistance.
3 Click
Add endpoint
.
Before you configure the Media2 blade to use, and register conferences
to, a SIP registrar, you must set up the Media2 blade and its conferences
on that SIP registrar.
i