Tannoy HCB-700 - Manual (Page 6)

This is the Internet version of the user's guide. © Print only for private use. 6
English
Control unit overview Getting started
Before you use the car handsfree with a phone for the first
time, you need to make sure that:
• The car handsfree kit is properly installed and turned on.
• Bluetooth is turned on in your phone.
• The car handsfree is added to the list of devices
in the phone.
To add the car handsfree to a phone
1 Turn on the ignition of the car. The car handsfree will
then be switched on automatically.
2 If you see rotating arrows on the display, go straight
to step 3, if not press and hold the button until the
rotating arrows appear and a long high tone is played.
You can also press the menu button, scroll to
Add phone , and press .
3 Prepare your phone according to the phone user
guide. The car handsfree passkey is 0000.
When the car handsfree has been successfully added to the
phone you will be guided through the following settings:
• Menu language
• Digit dialling
• Voice language (for Digit dialling)
To scroll in the menus, use the volume control. To select
press . For more information about the options in the
list, see their respective sections in this user guide.
1 Press to make and answer calls.
Press to select items in menus.
Press and hold to make the call list appear
on the display.
2 Press and hold to add the car handsfree
to a phone.
Press repeatedly to select a phone.
3 Press and hold to turn on/off.
Press to end and reject calls.
Press once to go back one step in menus.
4 Press to enter/exit the settings menu.
5 Press to mute/unmute the microphone.
6 Press to open the phonebook.
7 Rotate to adjust speaker and ring volume.
Rotate to scroll in lists.
1
2
3
4
5
6
7