Tannoy HCB-700 - Manual (Page 14)

This is the Internet version of the user's guide. © Print only for private use. 14
English
Installing
The Bluetooth Car Handsfree HCB-700 kit includes:
• electronic box with velcro (1)
• external loudspeaker (2)
• control unit with adhesive tape (3)
• microphone (4)
• hub (5)
• display with adhesive tape (6)
• cables (power cables, ignition sense, music mute)
• user guide
Mounting
You can mount the control unit, the display
and the microphone by using adhesive tape, screws
or car clips:
• If you use the adhesive tape to attach the control unit,
the display or the microphone, make sure you clean
the area where you want to attach it, using a suitable
grease-dissolving cleaning agent. Then remove
the paper, put the control unit, the display or the
microphone at the selected position and press firmly.
• If you mount the control unit and display by using
screws, make sure that the proper screws are used.
Contact your car dealer.
• If you do not want screw holes in your car, contact your
car dealer for a unique car clip that can be attached
without using screws.
1 2 3
4 5 6
Please make sure that all equipment of the car handsfree is
installed in a safe location. If your car is equipped with an air
bag, check that the handsfree equipment does not interfere with
its function.