Texas Instruments Extensa 600 Series - Manual (Page 94)

Moving Around
6-4
Preparing the Computer
Before moving the computer, press Fn-F2 to
place it in 0V Suspend mode. After placing the
computer in 0V Suspend mode, close and latch
the cover. You can now safely take the computer
anywhere you go within the building.
When you turn on the computer, the system is
restored to its saved state.
What To Bring to Short Meetings
A fully charged battery runs the computer for 2-
3 hours under most circumstances. If your
meeting is shorter than that, you probably do
not need to bring anything with you other than
the computer.
What To Bring to Long Meetings
If your meeting will last longer than 3 hours or if
your battery is not fully charged, you may want
to bring the AC adapter with you to plug in your
computer in the meeting room.
If the meeting room does not have an electrical
outlet, reduce the drain on the battery by
putting the computer in Standby mode (Fn-F4)
whenever you are not actively using the
computer.