Texas Instruments Extensa 600 Series - Manual (Page 103)

Startup Error Messages
7-4
Disk drive A error q Drive A: is present but fails the
BIOS POST disk tests.
q Enter Setup and check that the
drive is defined with the proper disk
type.
Extended RAM Failed at
offset:
nnnn
q Extended memory is not working or
configured properly at offset nnnn.
q Contact your dealer or an
authorized service center.
Failing Bits: nnnn q The nnnn is a map of the bits at the
RAM address which failed the
memory test.
q Contact your dealer or an
authorized service center.
Fixed Disk 0 Failure
Fixed Disk Controller
Failure
q Hard disk drive is not working or
not configured properly.
q Run Setup to check if the hard disk
drive type is correctly identified (try
setting this to [Auto]).
Incorrect Drive A type q The disk drive type is not correctly
identified in Setup.
q Run Setup and set the correct disk
drive type.