Video settings, Camera tracking mode, Document camera – Tandberg Data 7000 User Manual
Page 65
TANDBERG Videoconferencing System
65
Advanced use
Video Settings
Camera Tracking Mode
Select the camera tracking mode:
Slow:
The system waits a while before zooming in on a single person speaking. Suitable when wide-angle
images are preferred over close-up images.
Norm:
Should be used in regular meetings.
Fast:
The system quickly zooms in on a single person speaking. Suitable when close-ups are preferred over
wide-angle images.
T
HE
C
AMERA
T
RACKING
M
ODE
ENTRY
WILL
NOT
BE
AVAILABLE
IF
NOT
USING
THE
WAVE
C
AMERA
.
Document Camera
Users of a document camera with an S-video output can configure the system to activate an S-video input when
pressing ‘doc cam’ on the remote control.
Video2: Video Input 2 (S-video) will be activated when pressing ‘doc cam’ on the remote control.
Video3: Video Input 3 (Composite) will be activated when pressing ‘doc cam’ on the remote control.
PC
Configure what should be activated when pressing P
C
.
VGA:
Pressing P
C
will activate the VGA input on the system (default).
VNC:
Pressing P
C
will use VNC to show images from your PC (see ‘VNC Settings’ for further information).
NOTE