Far end camera control (fecc) – Tandberg Data 7000 User Manual
Page 36
36
TANDBERG Videoconferencing System
General use
OK
Far end camera control (FECC)
Press the F
AR
E
ND
key until the ‘FarEndCamera’ on-screen indicator is displayed.
For this feature to operate the far end must support ‘Far end camera control’ (H.281).
Whilst activated you will be able to control the far end’s camera (pan/tilt/zoom/focus) and presets.
To control the far end camera use the keys below:
for pan/tilt and for zooming.
Far end presets can be activated by pressing the keys P1 P2 P3 or the number keys 0-9 to activate presets P0-
P9.
Selection of far end videosources is achieved by pressing the buttons below when in FarEndCamera mode:
I
F
YOU
PRESS
D
OC
C
AM
,
IT
IS
NOT
CERTAIN
THAT
THE
FAR
END
DOCUMENT
CAMERA
WILL
BE
DISPLAYED
. T
HIS
DEPENDS
ON
SYSTEM
CONFIGURATION
AT
THE
FAR
END
.
To prevent others controlling your camera, select ‘Far End Camera Control:Off’ in ‘Utilities’.
zoom
doc cam
main cam
vcr
pc
aux
far end
NOTE