Tandberg Data 7000 User Manual
Page 24
24
TANDBERG Videoconferencing System
Getting started
TIP
Access Code
If the system requires an Access Code, enter the code and press OK to proceed making a call:
Using sub-address / extension address / MCU password
To specify an ISDN sub-address or its LAN equivalent extension address (TCS-4), add a star (*) after the number
and then enter the sub-address/extension address.
Example:
12345678*10 (
When calling to external MCU’s requiring a password (TSC-1), this password can be added after the star (*). If no
password is specified, a menu will prompt you to enter the password (after connected to the MCU).
S
UB
-
ADDRESS
IS
USED
TO
ADDRESS
DIFFERENT
SYSTEMS
ON
THE
SAME
ISDN
LINE
.
TCS-4
IS
USED
TO
ADDRESS
DIFFERENT
SYSTEMS
ON
A
LAN,
WHEN
DIALING
IN
VIA
A
GATEWAY
.