Toshiba 65H93 - Manual (Page 79)

Copyright © 2003 TOSHIBA CORPORATION. All rights reserved. 79
Chapter 8: Using the TV’s features
Turning off the built-in speakers
Use this feature to turn off the TV speakers when you connect
an audio system to your TV (see “Connecting a digital audio
system” and “Connecting an analog audio system” on page 19).
To turn off the built-in speakers:
1. Press MENU and open the AUDIO menu.
2. Highlight AUDIO SETUP and press ENTER.
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
Audio Setup
MTS
Language
Speakers
Audio Out
Optical Output Format
Save Done Reset
English
Stereo
Off
Main
Dolby Digital
3. Press z to highlight the SPEAKERS field, and then
press • to select OFF.
4. To temporarily save the new settings, highlight DONE and
press ENTER. To permanently save the new settings,
highlight SAVE and press ENTER.
To turn on the built-in speakers:
Select ON in step 3 above.
Selecting the AUDIO OUT sound
This feature allows you to select the audio source (MAIN or
POP) that is output from the AUDIO OUT jacks.
This is useful when amplifying or recording the POP sound
with external equipment while hearing the sound of the main
picture through the TV’s built-in speakers.
To select the Audio OUT sound:
1. Press MENU and open the AUDIO menu.
2. Press
z to highlight AUDIO SETUP and press ENTER.
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
3. Press z to highlight the AUDIO OUT field, and then
press x or • to select MAIN or POP.
– MAIN: Outputs the sound of the main program through
the AUDIO OUT jacks.
– POP: Outputs the sound of the POP program through
the AUDIO OUT jacks.
Audio Setup
MTS
Language
Speakers
Audio Out
Optical Output Format
Save Done Reset
English
Stereo
On
Main
Dolby Digital
Audio Setup
MTS
Language
Speakers
Audio Out
Optical Output Format
Save Done Reset
English
Stereo
On
POP
Dolby Digital
4. To temporarily save the new settings, highlight DONE and
press ENTER. To permanently save the new settings,
highlight SAVE and press ENTER.
Note:
• When the POP window is not open, the sound of the main program is
output through the AUDIO OUT jacks, even if POP is selected in the
AUDIO OUT menu.
• The sound of the main program is always output through the TV
speakers, regardless of the AUDIO OUT setting.
Adjusting the audio
(continued)
Selecting the optical audio output
format
Use this feature to select the optical audio output format when
you connect a Dolby Digital decoder or other digital audio
system to the OPTICAL AUDIO OUT jack on the TV (see
“Connecting a digital audio system” on page 19).
To select the optical audio output format:
1. Press MENU and open the AUDIO menu.
2. Highlight AUDIO SETUP and press ENTER.
3. Press
z to highlight the OPTICAL OUTPUT FORMAT
field, and then press • to select either DOLBY DIGITAL
or PCM, depending on your device.
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
Audio Setup
MTS
Language
Speakers
Audio Out
Optical Output Format
Save Done Reset
English
Stereo
On
Main
Dolby Digital
4. To temporarily save the new settings, highlight DONE and
press ENTER. To permanently save the new settings,
highlight SAVE and press ENTER.